Flat diagram of a video timeline with a play button, a stopwatch and five short scene blocks
Explainer Video Video Length Guide
By VEC Editorial Team • Updated October 25, 2026 • 12 min read

How Long Should an Explainer Video Be?

An explainer video should usually run 60 to 120 seconds, stretch to about three minutes only when the product is genuinely complex, and be cut down to 15 to 30 seconds for ads and store listings. The right number is set by where the video will play and how much the viewer must understand before the next step, not by a house rule.

Key Takeaways

  • Default to 60 to 120 seconds. That is enough room for a problem, a solution, proof and one next step without repeating yourself.
  • Placement beats preference. A homepage hero, a LinkedIn ad and an App Store preview each have a different sensible length, and some have hard platform limits.
  • Plan the script in words, not minutes. At a calm narration pace of roughly 2.5 words per second, a 90-second video is about 225 words.
  • Go longer only on purpose. Complex B2B products can justify two to three minutes, but each added scene must answer a question the buyer actually has.
  • Make a family of cuts. One master explainer plus 30-second and 15-second versions covers most channels for little extra cost.

What Is the Ideal Explainer Video Length?

For most B2B software, the ideal explainer video length is 60 to 120 seconds. That range is our editorial view from reviewing cuts for SaaS teams, and it sits just inside what published guidance describes: Atlassian's guide to explainer videos calls them "often only two to three minutes in length" and says they are not usually longer than two to four minutes (page checked October 25, 2026, atlassian.com). Treat three minutes as a ceiling you need a reason to approach, not a target to fill.

The reasoning is simple. An explainer has one job: get a viewer who does not yet understand the product to understand it well enough to take one next step. In under two minutes you can name the audience, show the pain, show the product resolving it, add one piece of proof and ask for the action. Anything that does not serve those five beats is a candidate for the cutting room.

If you are still deciding what an explainer should even contain, start with our roundup of explainer video examples, which shows how working B2B explainers handle length, and our SaaS explainer video guide for the format itself.

How Long Should It Be for Each Placement?

The sensible length changes with the context in which the video plays, and a few platforms set hard limits you cannot argue with. The table below gives practical starting points. Only the rows that cite a platform page are platform facts; the rest are editorial guidance to adjust with your own analytics.

Where it playsStarting lengthWhy
Homepage or landing-page hero60 to 90 secondsThe visitor is evaluating you and is willing to give a minute or two if the first ten seconds earn it. Editorial guidance.
Product or solution page90 to 120 secondsThe visitor already has the problem and wants the mechanism. Room for one proof beat. Editorial guidance.
Complex enterprise product, sales-assistedUp to about 3 minutesMatches the "two to three minutes" Atlassian describes. Use chapters or a short version next to it.
LinkedIn video ad15 to 30 seconds recommendedLinkedIn accepts three seconds to 30 minutes but recommends 15 to 30 seconds so the video qualifies for all placements (page checked October 25, 2026, linkedin.com).
App Store previewUp to 30 secondsApple lets each app preview run up to 30 seconds and autoplays it on the product page and in search results (page checked October 25, 2026, developer.apple.com).
Social cutdown or retargeting15 to 30 secondsOne idea, one frame of product, one call to action. Editorial guidance.
Email or sales-sequence link45 to 90 secondsLong enough to explain, short enough that a prospect will click without scheduling it. Editorial guidance.

One detail matters for ads. The LinkedIn page distinguishes the recommended 15 to 30 seconds from the technical maximum, and the same logic applies everywhere: what a platform allows is not what performs. If you are building a demo rather than an explainer, the same trade-offs apply with different numbers, and we cover them in product demo video length.

Why Does a Shorter Explainer Usually Work Better?

A shorter explainer usually works better because every extra second is another chance for the viewer to leave before the call to action, and because a tight script forces a clearer message. There is no single industry drop-off number we would quote with confidence, and you should be wary of anyone who offers one without a named, dated study. What teams commonly see in their own video analytics is a steepest fall in the first several seconds, then a slower decline, then a cliff wherever the video starts repeating itself.

That pattern points to three practical rules:

  • Front-load the value. Say who the video is for and what problem it solves inside the opening ten seconds, because an early exit is cheapest to prevent when the viewer sees themselves in the first sentence.
  • Cut by repetition, not by speed. Rushing the voiceover to hit a time target makes the video harder to follow. Remove a scene instead.
  • Judge length by information, not by the clock. A 75-second video with five clear beats beats a 45-second video that crams in ten features.

The same discipline shows up in other formats. Our guide to how long a corporate video should be and the one on how long a product demo video should be reach the same conclusion from different directions: define the job, then size the video to the job.

How Many Words Fit in an Explainer Video?

A voiceover read at a calm, clear pace runs at roughly 150 words per minute, or about 2.5 words per second, so a 90-second explainer carries around 225 words. That is a planning rule of thumb used by scriptwriters, not a precise standard: fast, energetic reads run higher, and pauses for on-screen animation run lower. Use the table to size a first draft, then time the real recording.

Target lengthApproximate script lengthWhat fits
15 secondsAbout 35 to 40 wordsOne hook, one benefit, one call to action
30 secondsAbout 75 wordsProblem, solution in one sentence, call to action
60 secondsAbout 150 wordsOne problem, one workflow, one next step
90 secondsAbout 225 wordsAdds one proof point and a short product walkthrough
120 secondsAbout 300 wordsAdds a second use case or a short objection-handling beat
180 secondsAbout 450 wordsMulti-persona or multi-step product story; needs strong structure

Write the script to the lower end of the range, because animation and screen moments need breathing room with no narration over them. If your first draft is 400 words and you want 90 seconds, you do not have a pacing problem; you have a scope problem, and the fix is fewer ideas. Our explainer video script template gives you a structure that keeps scripts to size.

How Should You Pace a 90-Second Explainer?

Pace a 90-second explainer in five beats, giving the problem and the product demonstration the most time and the call to action the least. The split below is an editorial starting point we use when briefing edits, not a measured benchmark, and it scales proportionally to 60 or 120 seconds.

BeatTime windowJob
1. Hook0 to 10 secondsName the audience and the pain so the right viewer recognises themselves
2. Problem10 to 30 secondsMake the cost of the problem concrete, with one specific scenario
3. Solution30 to 65 secondsShow the product resolving that scenario, using real screens as early as the story allows
4. Proof65 to 80 secondsOne credible signal: a customer outcome you can verify, a recognisable logo set or a real-use moment
5. Next step80 to 90 secondsOne action, spoken and written on screen

Two editing choices protect the pacing. First, build the video so it still makes sense with the sound off: captions and on-screen text carry the message, which also helps accessibility. The W3C's captioning guidance explains why captions matter for people who cannot hear audio and is a reasonable baseline for what to provide (page checked October 25, 2026, w3.org). Second, cut scene transitions that exist only to look polished. Each unnecessary second of motion is a second not spent explaining.

When Is It Right to Go Longer?

It is right to go longer when the product has several distinct workflows, when the buyer is a committee that needs more reassurance, or when the video is a destination rather than an interruption. In those cases two to three minutes is defensible, which is where the Atlassian guidance puts typical explainers. Beyond that you are usually making a different kind of video, such as a product tour, a webinar clip or a training module, and it should be planned as one.

Before you approve a longer cut, run it through three tests:

  • The question test. Can you point to a specific buyer question that each added scene answers? If not, cut the scene.
  • The order test. Does the most important idea still land in the first minute, so a viewer who leaves early still got the point?
  • The shorter-version test. Could you also ship a 60-second version for cold traffic? If the long version is the only version, it is probably carrying content that belongs elsewhere.

Complex categories such as security, fintech and healthcare often lean to the long end because trust takes time to build. If you are choosing a studio for a longer, more complex story, our animated explainer video company buyer's guide covers what to ask before you compare style or price.

Should You Make Several Lengths of One Video?

Yes: the most efficient approach is to plan one master explainer and cut shorter versions from it at the same time, because a single master rarely fits every channel. Edit the master first, then derive the shorter cuts from its strongest beats instead of squeezing the whole story into a smaller box.

VersionLengthUseWhat stays
Master60 to 120 secondsWebsite, product page, sales follow-upAll five beats
CutdownAbout 30 secondsLinkedIn and retargeting ads, App Store previewHook, solution, call to action
TeaserAbout 15 secondsFeed placements and short socialHook and call to action
Chaptered long versionUp to about 3 minutesSales-assisted deals and onboardingMaster plus extra use cases

Plan the cutdowns before you record. If you know a 30-second ad is coming, you can write the master so its strongest sentence also works as the ad hook, and design the animation so the key frames survive the shorter edit. Re-editing an existing video into several lengths is exactly the kind of repeatable work a dedicated post-production team handles well; our how it works page shows the turnaround terms for shorter and longer edits.

Does Length Change the Price?

Length changes the price, but usually less than style does. Most explainer quotes are built on finished minutes, and the larger swings come from animation style, scripting, voiceover and the number of revision rounds. Market quotes for animated explainers run from low four figures to well beyond ten thousand dollars depending on those choices, and any single number you read without a date and a source should be treated as a rough indication.

For a practical breakdown of what drives the quote, read our explainer video cost breakdown and the side-by-side in explainer video cost comparison. If your explainer is 2D rather than 3D, our guide to 2D animation production cost shows how scene count and complexity move the price. Where length matters more than people expect is the cutdown family: three lengths from one master cost far less than three separate productions.

VEC takes a different route to the same question. It is a dedicated post-production team, with no on-location shooting and no 3D, working on monthly plans of $5K, $9.5K and $16K rather than per-video quotes, so extra lengths of the same video do not trigger a new project fee. Current plan details are on the pricing page.

How Do You Fix an Explainer That Is Too Long?

Fix an overlong explainer by cutting scope before cutting speed: remove whole ideas first, then trim the remaining scenes, and only then tighten the voiceover. Work through the checklist in order.

  1. Write the one-sentence promise. If you cannot state what the viewer will understand by the end, the video is not ready for editing.
  2. List every scene and its job. Mark any scene that repeats a point already made, or that exists because a stakeholder asked for a feature to appear.
  3. Cut one idea at a time. Remove the weakest scene, watch the video through and ask whether the story still works.
  4. Tighten the language. Replace multi-clause sentences with short ones, and drop adjectives that do not change meaning.
  5. Check the first ten seconds. If the audience and the pain are not both clear by then, rework the opening before touching anything else.
  6. Test two versions. Publish the master and the shorter cut on the same page or to similar audiences, compare watch-through and clicks on the call to action in your own analytics, and keep whichever performs better.

An honest reading of the results matters more than the exact numbers. If both versions perform similarly, keep the shorter one: it is cheaper to localise, easier to reuse and less likely to feel padded. If you are weighing who should make it, our guide to the best explainer video companies for B2B SaaS compares the options on price and speed.

FAQ

How long should an explainer video be?

An explainer video should usually run 60 to 120 seconds. Complex B2B products can justify up to about three minutes, and ads or store previews should be 15 to 30 seconds. Choose the length by placement and by the number of ideas the viewer must understand, then cut anything that does not serve them.

Is a 3-minute explainer video too long?

Not automatically. Published guidance such as Atlassian's describes explainers as often two to three minutes long, so three minutes is within normal range for a complex product. It becomes too long when scenes repeat a point or the opening takes too long to reach the problem. Ship a 60 to 90 second version beside it for cold traffic.

How many words should an explainer video script have?

Plan on roughly 150 words per minute of finished video at a calm pace, so about 150 words for 60 seconds and about 225 for 90 seconds. That is a scriptwriting rule of thumb. Write toward the low end of the range and time the real voiceover, since animation and screen moments need room without narration.

How long should a LinkedIn or App Store explainer be?

LinkedIn accepts video from three seconds to 30 minutes but recommends 15 to 30 seconds for video ads. Apple allows each App Store app preview up to 30 seconds. In both cases cut a purpose-made short version from your master instead of uploading the full explainer.

Does a longer explainer video cost more?

Usually yes, because quotes are commonly built on finished minutes, but style, scripting, voiceover and revision rounds move the price more than length does. Creating a 30-second and 15-second cutdown alongside the master costs much less than separate productions. VEC's plans are $5K, $9.5K and $16K per month and cover multiple lengths of the same video.

Planning an Explainer Video?

Send us the audience, the one problem and the places the video needs to play, and we will tell you honestly what length makes sense, whether a dedicated 2D and motion-graphics team is the right fit and how many cutdowns to plan.

Book a Free Strategy Call See Pricing